The XENON1T Excess : The Newest Craze in Particle Physics

Paper: Observation of Excess Electronic Recoil Events in XENON1T

Authors: XENON1T Collaboration

Recently the particle physics world has been abuzz with a new result from the XENON1T experiment who may have seen a revolutionary signal. XENON1T is one of the world’s most sensitive dark matter experiments. The experiment consists of a huge tank of Xenon placed deep underground in the Gran Sasso mine in Italy. It is a ‘direct-detection’ experiment, hunting for very rare signals of dark matter particles from space interacting with their detector. It was originally designed to look for WIMP’s, Weakly Interacting Massive Particles, who used to be everyone’s favorite candidate for dark matter. However, given recent null results by WIMP-hunting  direct-detection experiments, and collider experiments at the LHC, physicists have started to broaden their dark matter horizons. Experiments like XENON1T, who were designed to look for heavy WIMP’s colliding off of Xenon nuclei have realized that they can also be very sensitive to much lighter particles by looking for electron recoils. New particles that are much lighter than traditional WIMP’s would not leave much of an impact on large Xenon nuclei, but they can leave a signal in the detector if they instead scatter off of the electrons around those nuclei. These electron recoils can be identified by the ionization and scintillation signals they leave in the detector, allowing them to be distinguished from nuclear recoils.

In this recent result, the XENON1T collaboration searched for these electron recoils in the energy range of 1-200 keV with unprecedented sensitivity.  Their extraordinary sensitivity is due to its exquisite control over backgrounds and extremely low energy threshold for detection. Rather than just being impressed, what has gotten many physicists excited is that the latest data shows an excess of events above expected backgrounds in the 1-7 keV region. The statistical significance of the excess is 3.5 sigma, which in particle physics is enough to claim ‘evidence’ of an anomaly but short of the typical 5-sigma required to claim discovery.

The XENON1T data that has caused recent excitement. The ‘excess’ is the spike in the data (black points) above the background model (red line) in the 1-7 keV region. The significance of the excess is around 3.5 sigma.

So what might this excess mean? The first, and least fun answer, is nothing. 3.5 sigma is not enough evidence to claim discovery, and those well versed in particle physics history know that there have been numerous excesses with similar significances have faded away with more data. Still it is definitely an intriguing signal, and worthy of further investigation.

The pessimistic explanation is that it is due to some systematic effect or background not yet modeled by the XENON1T collaboration. Many have pointed out that one should be skeptical of signals that appear right at the edge of an experiments energy detection threshold. The so called ‘efficiency turn on’, the function that describes how well an experiment can reconstruct signals right at the edge of detection, can be difficult to model. However, there are good reasons to believe this is not the case here. First of all the events of interest are actually located in the flat part of their efficiency curve (note the background line is flat below the excess), and the excess rises above this flat background. So to explain this excess their efficiency would have to somehow be better at low energies than high energies, which seems very unlikely. Or there would have to be a very strange unaccounted for bias where some higher energy events were mis-reconstructed at lower energies. These explanations seem even more implausible given that the collaboration performed an electron reconstruction calibration using the radioactive decays of Radon-220 over exactly this energy range and were able to model the turn on and detection efficiency very well.

Results of a calibration done to radioactive decays of Radon-220. One can see that data in the efficiency turn on (right around 2 keV) is modeled quite well and no excesses are seen.

However the possibility of a novel Standard Model background is much more plausible. The XENON collaboration raises the possibility that the excess is due to a previously unobserved background from tritium β-decays. Tritium decays to Helium-3 and an electron and a neutrino with a half-life of around 12 years. The energy released in this decay is 18.6 keV, giving the electron having an average energy of a few keV. The expected energy spectrum of this decay matches the observed excess quite well. Additionally, the amount of contamination needed to explain the signal is exceedingly small. Around 100 parts-per-billion of H2 would lead to enough tritium to explain the signal, which translates to just 3 tritium atoms per kilogram of liquid Xenon. The collaboration tries their best to investigate this possibility, but they neither rule out or confirm such a small amount of tritium contamination. However, other similar contaminants, like diatomic oxygen have been confirmed to be below this level by 2 orders of magnitude, so it is not impossible that they were able to avoid this small amount of contamination.

So while many are placing their money on the tritium explanation, there is the exciting possibility remains that this is our first direct evidence of physics Beyond the Standard Model (BSM)! So if the signal really is a new particle or interaction what would it be? Currently it it is quite hard to pin down exactly based on the data. The analysis was specifically searching for two signals that would have shown up in exactly this energy range: axions produced in the sun, and neutrinos produced in the sun interacting with electrons via a large (BSM) magnetic moment. Both of these models provide good fits to the signal shape, with the axion explanation being slightly preferred. However since this result has been released, many have pointed out that these models would actually be in conflict with constraints from astrophysical measurements. In particular, the axion model they searched for would have given stars an additional way to release energy, causing them to cool at a faster rate than in the Standard Model. The strength of interaction between axions and electrons needed to explain the XENON1T excess is incompatible with the observed rates of stellar cooling. There are similar astrophysical constraints on neutrino magnetic moments that also make it unlikely.

This has left door open for theorists to try to come up with new explanations for these excess events, or think of clever ways to alter existing models to avoid these constraints. And theorists are certainly seizing this opportunity! There are new explanations appearing on the arXiv every day, with no sign of stopping. In the roughly 2 weeks since the XENON1T announced their result and this post is being written, there have already been 50 follow up papers! Many of these explanations involve various models of dark matter with some additional twist, such as being heated up in the sun or being boosted to a higher energy in some other way.

A collage of different models trying to explain the XENON1T excess (center). Each plot is from a separate paper released in the first week and a half following the original announcement. Source

So while theorists are currently having their fun with this, the only way we will figure out the true cause of this this anomaly is with more data. The good news is that the XENON collaboration is already preparing for the XENONnT experiment that will serve as a follow to XENON1T. XENONnT will feature a larger active volume of Xenon and a lower background level, allowing them to potentially confirm this anomaly at the 5-sigma level with only a few months of data. If  the excess persists, more data would also allow them to better determine the shape of the signal; allowing them to possibly distinguish between the tritium shape and a potential new physics explanation. If real, other liquid Xenon experiments like LUX and PandaX should also be able to independently confirm the signal in the near future. The next few years should be a very exciting time for these dark matter experiments so stay tuned!

Read More:

Quanta Magazine Article “Dark Matter Experiment Finds Unexplained Signal”

Previous ParticleBites Post on Axion Searches

Blog Post “Hail the XENON Excess”

Listening for axions

If dark matter actually consists of a new kind of particle, then the most up-and-coming candidate is the axion. The axion is a consequence of the Peccei-Quinn mechanism, a plausible solution to the “strong CP problem,” or why the strong nuclear force conserves the CP-symmetry although there are no reasons for it to. It is a very light neutral boson, named by Frank Wilczek after a detergent brand (in a move that obviously dates its introduction in the ’70s).

Axion decay in a magnetic field: the result is a photon. (Source.)

Most experiments that try to directly detect dark matter have looked for WIMPs (weakly interacting massive particles). However, as those searches have not borne fruit, the focus started turning to axions, which make for good candidates given their properties and the fact that if they exist, then they exist in multitudes throughout the galaxies. Axions “speak” to the QCD part of the Standard Model, so they can appear in interaction vertices with hadronic loops. The end result is that axions passing through a magnetic field will convert to photons.

In practical terms, their detection boils down to having strong magnets, sensitive electronics and an electromagnetically very quiet place at one’s disposal. One can then sit back and wait for the hypothesized axions to pass through the detector as earth moves through the dark matter halo surrounding the Milky Way. Which is precisely why such experiments are known as “haloscopes.”

Now, the most veteran haloscope of all published significant new results. Alas, it is still empty-handed, but we can look at why its update is important and how it was reached.

ADMX (Axion Dark Matter eXperiment) of the University of Washington has been around for a quarter-century. By listening for signals from axions, it progressively gnaws away at the space of allowed values for their mass and coupling to photons, focusing on an area of interest:

ADMX_results_2020
Latest exclusion limits on the axion mass and coupling to photons.

Unlike higher values, this area is not excluded by astrophysical considerations (e.g. stars cooling off through axion emission) and other types of experiments (such as looking for axions from the sun). In addition, the bands above the lines denoted “KSVZ” and “DFSZ” are special. They correspond to the predictions of two models with favorable theoretical properties. So, ADMX is dedicated to scanning this parameter space. And the new analysis added one more year of data-taking, making a significant dent in this ballpark.

As mentioned, the presence of axions would be inferred from a stream of photons in the detector. The excluded mass range was scanned by “tuning” the experiment to different frequencies, while at each frequency step longer observation times probed smaller values for the axion-photon coupling.

Two things that this search needs is a lot of quiet and some good amplification, as the signal from a typical axion is expected to be as weak as the signal from a mobile phone left on the surface of Mars (around 10-23W). The setup is indeed stripped of noise by being placed in a dilution refrigerator, which keeps its temperature at a few tenths of a degree above absolute zero. This is practically the domain governed by quantum noise, so advantage can be taken of the finesse of quantum technology: for the first time ADMX used SQUIDs, superconducting quantum interference devices, for the amplification of the signal.

The heart of the experiment inside the refrigerator. The resonant frequency of the cavity is tuned to match the photons -hopefully- given off by axions. (Source.)




In the end, a good chunk of the parameter space which is favored by the theory might have been excluded, but the haloscope is ready to look at the rest of it. Just think of how, one day, a pulse inside a small device in a university lab might be a messenger of the mysteries unfolding across the cosmos.

References:

Publication by the ADMX collaboration. (arXiv)

Learn more:

  1. The theory behind axions.
  2. The hitchhiker’s guide to the dilution refrigerator.
  3. Intro to KSVZ and DFSZ axions (and more).
  4. Resonant cavities.

LHCb’s Flavor Mystery Deepens

Title: Measurement of CP -averaged observables in the B0→ K∗0µ+µ− decay

Authors: LHCb Collaboration

Refference: https://arxiv.org/abs/2003.04831

In the Standard Model, matter is organized in 3 generations; 3 copies of the same family of particles but with sequentially heavier masses. Though the Standard Model can successfully describe this structure, it offers no insight into why nature should be this way. Many believe that a more fundamental theory of nature would better explain where this structure comes from. A natural way to look for clues to this deeper origin is to check whether these different ‘flavors’ of particles really behave in exactly the same ways, or if there are subtle differences that may hint at their origin.

The LHCb experiment is designed to probe these types of questions. And in recent years, they have seen a series of anomalies, tensions between data and Standard Model predictions, that may be indicating the presence of new particles which talk to the different generations. In the Standard Model, the different generations can only interact with each other through the W boson, which means that quarks with the same charge can only interact through more complicated processes like those described by ‘penguin diagrams’.

The so called ‘penguin diagrams’ describe how rare decays like bottom quark → strange quark can happen in the Standard Model. The name comes from both their shape and a famous bar bet. Who says physicists don’t have a sense of humor?

These interactions typically have quite small rates in the Standard Model, meaning that the rate of these processes can be quite sensitive to new particles, even if they are very heavy or interact very weakly with the SM ones. This means that studying these sort of flavor decays is a promising avenue to search for new physics.

In a press conference last month, LHCb unveiled a new measurement of the angular distribution of the rare B0→K*0μ+μ– decay. The interesting part of this process involves a b → s transition (a bottom quark decaying into a strange quark), where number of anomalies have been seen in recent years.

Feynman diagrams of the decay being studied. A B meson (composed of a bottom and a down quark) decays into a Kaon (composed of a strange quark and a down quark) and a pair of muons. Because this decay is very rare in the Standard Mode (left diagram) it could be a good place to look for the effects of new particles (right diagram). Diagrams taken from here

Rather just measuring the total rate of this decay, this analysis focuses on measuring the angular distribution of the decay products. They also perform this mesaurement in different bins of ‘q^2’, the dimuon pair’s invariant mass. These choices allow the measurement to be less sensitive to uncertainties in the Standard Model prediction due to difficult to compute hadronic effects. This also allows the possibility of better characterizing the nature of whatever particle may be causing a deviation.

The kinematics of decay are fully described by 3 angles between the final state particles and q^2. Based on knowing the spins and polarizations of each of the particles, they can fully describe the angular distributions in terms of 8 parameters. They also have to account for the angular distribution of background events, and distortions of the true angular distribution that are caused by the detector. Once all such effects are accounted for, they are able to fit the full angular distribution in each q^2 bin to extract the angular coefficients in that bin.

This measurement is an update to their 2015 result, now with twice as much data. The previous result saw an intriguing tension with the SM at the level of roughly 3 standard deviations. The new result agrees well with the previous one, and mildly increases the tension to the level of 3.4 standard deviations.

LHCb’s measurement of P’5, an observable describing one part of the angular distribution of the decay. The orange boxes show the SM prediction of this value and the red, blue and black point shows LHCb’s most recent measurement (a combination of its ‘Run 1’ measurement and the more recent 2016 data). The grey regions are excluded from the measurement because they have large backgrounds from the decays of other mesons.

This latest result is even more interesting given that LHCb has seen an anomaly in another measurement (the R_k anomaly) involving the same b → s transition. This had led some to speculate that both effects could be caused by a single new particle. The most popular idea is a so-called ‘leptoquark’ that only interacts with some of the flavors.

LHCb is already hard at work on updating this measurement with more recent data from 2017 and 2018, which should once again double the number of events. Updates to the R_k measurement with new data are also hotly anticipated. The Belle II experiment has also recent started taking data and should be able to perform similar measurements. So we will have to wait and see if this anomaly is just a statistical fluke, or our first window into physics beyond the Standard Model!

Read More:

Symmetry Magazine “The mystery of particle generations”

Cern Courier “Anomalies persist in flavour-changing B decays”

Lecture Notes “Introduction to Flavor Physcis”